Catch basins remove and drain standing water, preventing asphalt from degrading and other costly forms of damage. Let Sure-Seal Pavement Inc. help protect your asphalt.
After saw cutting around the catch basin and removing the damaged asphalt, the area is excavated. Broken modulock rings or pup sections are removed. New pup sections are installed as necessary.
We next add 2″ or 3″ modulocks rings on top of the structure, as necessary, to raise the catch basin to the correct elevation for effective drainage of surface water to enter and drain away once paving is completed.
The excavation if then filled in using suitable existing and new granular base material and compacted to ensure no settlement.
The original or new catch basin frame and grate is then re-installed in place.
The final granular grade is set with additional gravel and graded.
Final compaction of the dirt and gravel is done completed in preparation for paving.
A base asphalt layer is placed, graded and compacted to 2 below final elevation to allow for the top layer of asphalt to be placed.
The top layer of asphalt is then paved ensuring effective water flow to the catch basin and into the drainage system.
